EndoCube

EndoCube fits over the thermostat sensor on commercial refrigeration units which reacts to the product temperature, not the air temperature. EndoCube is the only patented Microcrystalline wax that creates an air barrier around thermostat probes which mimics food and encases the thermostat sensor preventing fluctuating air temperatures from controlling the refrigeration unit. NSF, under protocol 235, has proven EndoCube to mimic food and beverage properties. This reduces your cooler/refrigerator power costs by upto 25% while still maintaining a safe food temperature.

This product also reduces the cycle times experienced by the refrigeration equipment. Reduced cycle times are the key to extending the life of the equipment.

ROI on this product is generally between 2-6 months depending on the equipment you are using. It has a 10 year waranty against defects.

Testimonials

Filtirite

Filtirite is a passive filtration and absorption system. It reduces the humidity in the cooler/refrigerator which lowers the heat transfer when the cooler is open. It also removes odors and particulates in the air. If you have a problem with water and icing in your cooler/refrigeration, then you need this product.

Filtrite is maintained at a very low cost of around $40 per month. We will replace your filters each month and install new ones.

Since the cost of this product is very low, you should see an immediate return on any money invested in it, especially in the Southeast where humidity runs above 80% most of the time.

Temp Minder

Temp Minder™ is a convenient system that allows you to wirelessly monitor all cold and hot holding automatically with up to the minute data based on your set temperature ranges. Reports are stored online for up to one year.

Temp Minder Online™

Your temperature records are available 24/7 to view, analyze and print reports from anywhere in the world. Temp Minder Online™ has multiple levels that allow food service directors, area managers and district managers to view their respective sites.

Alerts

On-site alarm sounds audibly on the central display when temperatures move outside critical control points. Corrective actions can be performed to eliminate food safety problems. Off-site alerts are received via text message, phone or e-mail.

Temp Minder™ Food Monitor

The Hold ‘n‘ Temp™ option allows continuous monitoring of food and hold time in buffets, display cases or steam tables. A special food-safe wireless probe transmits the temperature back to the Temp Minder™.

Off Duty Probe™

This probe is used in holding devices that are turned on and off. When they are offline, they are placed on a special rack that sets the notifications and alerts off.

Humidity Sensor™

Monitors temperature and humidity.

CCP Minder™

A system for remote monitoring of operational checks including line temperature checks, hygiene and sanitary checks. The system automates the scheduling, measuring and reporting of data in your HACCP program. It allows you to automate your daily checklist making it easy to turn your HACCP procedures into an easy-to-use, paperless HACCP recording and reporting system.

Cook ‘n‘ Chill™

The Cook ‘n‘ Chill™ option allows continuous monitoring of food that is placed into the cook and chill process. It records the initial temperature and will alarm if the food is not cooled within the prescribed amount of time. All temperature information is placed into the online database for instant access and reports.

Open Door Sensor™

Monitors temperature and senses when the door is open or closed; contributes to asset protection and conserving energy.

Dish Washer Sensor™

Automatically monitors temperatures when the rinse water turns on.

KE2Therm

This line of products replaces your existing freezer/cooler control system. It provides energy savings 15-50% over mechanically controlled systems. Ideal for walk-in coolers, closed door display cases, refrigerated warehouses, meat prep rooms, walk-in freezers and blast freezers.

Features

      • Eliminates unnecessary defrosts typically associated with timed based alternatives-reducing energy consumption and preserving product integrity
      • Maximizes energy efficiency with less compressor run time resulting from shorter defrosts
      • Eliminates ice formation on floors and ceilings
      • Eliminates excessive temperature swings

USES

USES is a product that cleans up the power being fed to your facility. It balances the induction loading that is introduced into the power through the use of electic motors such as air conditioning or shop equipment. The inductive loads that these devices introduce into the power system cause a increase in the power factor. By balancing the inductive loads the power factor is reduced which reduces the amount of electricity that is used. A high power factor also adds wear to the motors and causes them to run hotter than in a environment with a lower power factor. This unit also protects against surges.

Protection

USES provides unsurpassed surge and lightning protection. USES addresses these problems through its dynamic filtering and phase balancing. The Metal Oxide Varistors (MOV‘s) within the USES units shunt surges and spikes from one phase to all three phases, not to ground. The system then channels the now reduced spike/surge through the magnetic chokes/transformers which further flatten out the sine wave spike. This is critical because:

      •Grounded spikes and surges can often work their way back into a facility
      •By channeling the spike/surge back onto the system at 60 Hz, the energy is now available for motor action

One incident will pay for the investment in a USES system.

Reduced Power Consumption and Demand

USES reduces kW consumption and demand by dynamically and continuously recycling non 60 Hz energy to clean, useable 60 Hz energy through cross-coupled magnetic chokes/transformers. The net result is HARD DOLLAR savings for your facility. Our Return on Investment projections are based on quantifiable reductions in your facilities energy profile and do not include ‘soft savings‘. Depending on a facilities efficiency/load profile, our clients typically see a 7 to 12 percent decline in energy consumption and demand.

Power Factor Correction

USES will improve power factor throughout a facility, bringing it as close to unity as possible, without the possibility of generating harmful RCL resonance. The USES unit co-generates a reactive current through a resonant circuit consisting of three-phase capacitors (CAPS) typically 1/50th the size of traditional PF CAPS. These CAPS are linked with the wrap-around magnetic chokes which connect the phases magnetically. The leading current migrates throughout a plant canceling any lagging current and thereby locally correcting the PF.

Summary of USES Power Conditioning Benefits and Features:

      •Reduced kW demand and kWh consumption
      •Reduced electrical bills
      •Protection from spikes, surges and sags
      •Improved power factor
      •Increased motor life
      •No maintenance and greater than 10 year life expectancy
      •5 Year all inclusive warranty
      •UL and CSA approval
      •Patented technology in the US, Canada and 21 foreign countries

LED Lighting

Currently, many road systems use incandescent lighting for their street lights. We offer an equivalent LED lighting system that both reduces the electrical cost per bulb and also decreases the number of times the bulb needs changed. The initial cost of an LED light is more expensive than the cost of an incandescent light but the cost difference is made up quickly by decreased electrical costs. The LED lights also have a 10 year life span in comparison to a one year life span of the incandescents. This reduces the number of time that the LED light will need to be changed out.

Induction Lighting

Currently, many road systems use incandescent lighting for their street lights. We offer an equivalent induction lighting system that both reduces the electrical cost per bulb and also decreases the number of times the bulb needs changed. The initial cost of an induction light is more expensive than the cost of an incandescent light but the cost difference is made up quickly by decreased electrical costs. The induction lights also have a 10 year life span in comparison to a one year life span of the incandescents. This reduces the number of time that the induction light will need to be changed out.

HHO

HHO is a hydrogen generation kit that can be added on to tractor-trailers that will increase their gas mileage by 5.5-7 mpg. The system works by using water to generate hydrogen through electrolysis. Once the hydrogen is introduced into the intake manifold, it mixes with the vaporized fuel and enters the cylinder. When the fuel is ignited, the hydrogen causes a more complete burning of the fuel because the ignition of hydrogen is several times faster than other fuels. This causes the ignition to spread through the cylinder and burn the fuel more completely that just a regular ignition. Since the fuel is burned more completely, you will notice and increase in power and a decrease in emissions. This system can also be used in cars, generators and boats.

HydroFLOW

HydroFLOW utilizes what is called Hydropath Technology. The difference between Hydropath Technology and other physical water conditioning technologies is an induced signal which has the ability to continuously condition the liquid solution throughout an entire system. HydroFLOW‘s water conditioners induce an electric signal of ±150kHz into any water pipe on which they are installed (metal or PVC).

The electric induction is performed by a special transducer connected to a ring of ferrites. Just as an electrical wire carries current from point A to B, the water inside the pipe acts as a conductor and carries the induced electric signal throughout the entire water system. The oscillating sine waves of the induced AC signal cause the positively and negatively-charged ions to form suspended clusters in the water, preventing them from attaching to rough surfaces. Testing shows that compared to other technologies, Hydropath Technology is many times more efficient and effective.

Allied Group USA carries a full range of HydroFLOW water conditioners providing a chemical-free solution for the harmful effects of limescale, corrosion, bacteria, and algae within the industrial sector. These durable water conditioners are fully encapsulated and water-resistant. Designed for ease of installation, the unit is simply built around the pipe and connected via the power supply unit. Various-sized units fit pipes of all sizes.

For additional information on HydroFLOW please watch the video or visit our national site at www.hydroFLOW-USA.com.

AGF

Allied Group Filtration (AGF) is a passive filtration system that is used in conjuction with other products to remove suspended solids from the water that is being filtered. It will remove 95% of all suspended solids.

Sonic Solutions

SonicSolutions‘ ultrasonic algae control uses no chemicals and has proven to be effective in tanks, lakes, reservoirs and more. It‘s been successfully used at power plants, golf courses, botanical gardens, water and wastewater treatment plants, marinas, and other personal and commercial installations. It lowers pH and TSS!

Floating just below the surface, the device operates 24-hours a day providing coverage for up to 8 acres depending on conditions. Multiple units can be installed for larger applications. It is easy to install, requires almost no maintenance and uses less than 10 watts of power. With this device there is no need to measure and apply toxic chemicals.

The SonicSolutions‘ algae control device emits ultrasonic waves that “fan out“ at approximately 180° from the front of the transducer. Range and coverage area are dependant on the local conditions, including the distance to the site from the equator and nutrient loading. Units can be used in combination to provide complete coverage of large installations.

FMD (Flow Management Device, aka H2MinusO)

Your water travels through a maze of pipes and fixtures from your water providers distribution system to your facility or home. Through this maze your water will flow through many different size pipes and piping fixtures (elbows, T's, bypasses, shutoff valves, etc...) generating friction or for lack of a better term impedance to the flow. This impedance (Friction) will generate a miniscule amount of air, visually in the form of a bubble. As the water flows through this system it experiences these various extreme conditions that also creates turbulence. Unfortunately, commercial water meters cannot effectively measure turbulent water, so they end up measuring too much and charging you for more than you have actually used.

That is where the FMD comes in, our team will procure the data necessary for us to customize our product for your facility. By placing it just downstream of your water meter, it uses this miniscule amount of air in conjunction with its oscillation process to reduce the turbulence by breaking the air into smaller particles. This fragmentation process reduces the turbulence, allowing the water meter reading to be more accurate and correcting your billable consumption resulting in lower utility charges.